Solid Wood Pivot Doors

Custom Pivot Doors in Solid Wood

Pivot Doors

What Is a Custom Pivot Door?

RHA Custom Doors builds custom wood pivot doors at our workshop in Rosarito, B.C. A pivot door turns on a pivot at the floor and at the top of the frame instead of on side hinges, so one large panel of solid wood can open smoothly. We install in San Diego, and quotes are free.

Ready to start? Request a free quote or message us on WhatsApp.

Built in
Rosarito, B.C. workshop
Installed in
San Diego
Typical build time
About 2-3 weeks, varies by project
Pricing
Custom quote, free
Woods
White oak, red oak, mahogany, walnut, parota

How a pivot door works

On a conventional door, the hinges on one edge carry the weight. On a pivot door, the weight rests on a pivot assembly at the floor, with a matching pivot at the head of the frame keeping the door aligned. Because the load goes down through the floor, a pivot door can be much wider and taller than a hinged door would comfortably be, which is why pivots are a popular choice for modern and statement entrances.

Our pivot doors are made as solid-wood panels, often with horizontal or vertical plank lines, a tall glass slot, or a smooth continuous face. See the full range of entrances on our entry doors page, or compare with a pair of double entry doors.

See It Move

A Solid Wood Pivot Door in Motion

A solid wood pivot door swinging on its pivot, with a long vertical pull handle. Want something similar? Request a free quote.

Why Pivot

Why Choose a Wood Pivot Front Door

A statement entrance

A single oversized panel of solid wood makes the front of a home read as one deliberate, sculptural element.

Generous proportions

Pivots suit wide, tall openings where a hinged door would feel narrow, and they give a roomy, welcoming threshold.

Clean, modern lines

With no visible side hinges, the face of the door stays uninterrupted, so the wood grain and any plank pattern take center stage.

Built to your opening

Every pivot door we make is custom: size, wood, pattern, glass, handle and finish are all designed around your project.

Compare

Pivot Door vs Hinged Door

A pivot door turns on a pivot at the floor and the top of the frame, so its weight goes down through the floor and one large panel can open smoothly. A hinged door hangs from hinges along one edge and suits a standard opening. Choose a pivot for a wide, modern entrance, and hinges for a conventional look.

Pivot door and hinged door, compared
FeaturePivot doorHinged door
Where the weight restsOn a pivot at the floor, with a matching pivot at the top of the frameOn the hinges along one edge
Panel sizeSuits wide, tall panels of solid woodSuits a standard-width opening
LookUninterrupted face with no visible side hingesHinges show along the edge
How it swingsA center pivot swings both sides of the panel into the opening; an offset pivot opens more like a conventional doorSwings from one edge
Sealing and clearancesNeeds a carefully planned gap around the panel, so sealing and finish deserve attentionConventional sealing around the frame
InstallationNeeds solid support at the floor and at the head of the frameHangs on hinges fixed to the frame

For a modern look in deep brown tones, see our walnut doors. If a hinged door suits your opening better, read about our entry doors and double entry doors.

Design

Pivot Door Design Considerations

Opening size and proportions

The first decision is the size of the opening and how wide a panel looks right in it. Because a pivot panel can be large, we plan the door, the frame and the pivot positions together from your measurements, and we confirm everything in the written quote before we build.

Offset pivot or center pivot

The pivot axis does not have to sit in the middle of the door. A center pivot swings both sides of the panel into the opening, while an offset pivot moves the axis toward one edge so the door opens more like a conventional one. The right choice depends on the clearances around the entry, so tell us what is on either side of the door.

Handles and glass

Long vertical pull handles are a common match for pivot doors, and many of our designs add a narrow glass slot or fixed panels for light. Handle length, finish and position are all part of the design, so you can choose what suits the door and the house.

Sealing and weather exposure

A pivot door normally needs a carefully planned gap around the panel, so sealing and finish deserve attention. Whether the entry sits under a covered porch or is fully exposed to sun and rain affects the wood, the finish and the sealing details we recommend. Share this when you ask for a quote.

Frame and installation

The pivot hardware needs solid support at the floor and at the head of the frame, so installation matters as much as the door itself. We offer professional installation, and we deliver and install in San Diego and Southern California. Details for your area are on our San Diego page.

Materials

Woods for Pivot Doors

We build pivot doors in white oak, red oak, mahogany, walnut and parota, and can also work with maple, cherry and alder on request. Compare them in our wood guide, or see our parota, mahogany, white oak and walnut door pages.

Quote

What Goes Into a Pivot Door Quote

Every pivot door is custom-quoted, and the quote is free. Our door cost guide explains what shapes it.

Most of our doors take about 2 to 3 weeks to build, depending on size, wood, design and finish, and the schedule is confirmed in your written quote. We also work with contractors, builders, architects and designers; see our trade page, or our services for design consultation, manufacturing, installation and restoration.

FAQ

Pivot Door Questions

How much does a custom pivot door cost?

Every pivot door is custom-quoted, so we do not publish prices. Size, wood, thickness, hardware, glass, finish and installation all shape the quote, and quotes are free. Our door cost guide explains each factor, or message us on WhatsApp with your idea.

What are the pros and cons of a pivot door?

Pros: one large panel of solid wood, clean lines with no visible side hinges, and a statement entrance. Cons: it needs a carefully planned gap and sealing, plus solid support at the floor and the top of the frame, so installation matters. We review your opening and how exposed the entry is when we quote.

What hardware does a pivot door need?

A pivot door uses a pivot assembly at the floor and a matching pivot at the head of the frame, often with a long vertical pull handle. We plan the pivot positions and the handle together with the door from your measurements, and confirm them in the written quote.

How long does a custom pivot door take to build?

Pivot doors are made to order at our workshop in Rosarito, B.C. Most of our doors take about 2 to 3 weeks to build. The time varies with size, wood, design and finish, and the schedule is confirmed in the written quote.

Do you deliver and install pivot doors in San Diego?

Yes. We deliver and install in San Diego and Southern California, and we also serve Tijuana, Rosarito, Ensenada, Los Angeles, San Francisco and Las Vegas. The pivot hardware needs solid support at the floor and the frame, so installation is planned together with the door.

Ready to design yours? Try the online door designer or send us your project through the quote form. We also build in other styles, such as entry doors and double doors.

Related

Keep Exploring

Ready to Get Started?

Contact us today for a free consultation and quote on your custom door project.

Request a Free Quote Message Us on WhatsApp Call +52 664 403 39 73